📞 Contact:+1 (626) 977 8228 ✉️ Email: [email protected]

JC-100A-HC Hot Knife Cutter

product information

Hot Knife Cutter is most suitable to process sail cloth, awnings and filter cloth. (synthetic fabrics with thickness of 0.3mm or more).

Cut all kinds of fabrics. (clothing, banners, silk, chemical fiber cloth, velvet, advertising cloth, non-woven, nylon fabric. Wallpaper mural plastic sheeting)it will heal the contact area while cutting, which results in smooth and even cut surface, without thread pulling or burrs by welding the interface, (note)coupled with incision blade, it can be used to cut thin plastic sheet, or used in some simple cutting occasions, and for cutting plastic pipe.



product details

Hot Knife Cutter

  • Cut mooring rope within 2 cm diameters
  • Cut flat woven bag with even fracture and no thread losing
  • Cut the sewing tampons of cloth toys and ton bag with melt fracture



  • Adjustable hot knife cutter temperature according to the materials it can be used constantly.
  • A blade can heat up to 600 C
  • Equipped with different blades, it cuts different shapes and angles products.
  • No rough burr after cutting.
  • Power saving, only 100W.
  • Long lifespan and can non-stop run.
  • Much lighter and easier for shipping with low freight cost.


Suitable for fabrics, packing, advertising, clothing, outdoor equipment, mechatronics, vehicle, furniture, decoration, and construction

Close Menu