📞 Contact:+1 (626) 977 8228 ✉️ Email: [email protected]
Hot Air Gun Plastic Welding Process? Quick Guide by JC tool
Hot Air Welder Plastic Welding Kit

Hot Air Gun Plastic Welding Process? Quick Guide by JC tool

Hot Air Gun Plastic Welding Process – How to Weld Plastic with Hot Air Gun?

Hot Air Gun Plastic Welding Process. Are you planning to weld plastic together? Or looking for some fast and productive tools to join multiple pieces of plastic together as hot air gun?

JC-tool is a manufacturing company provides all solutions in plastic welding whether you need tools or machinery to repair damaged plastics. Your no need to be much stressed using our plastic welding machine. Plastic Welding is a very simple process using our equipment you do not need any special training. Our plastic welding machine & hot air gun is very fast and reliable.

Before considering to welding plastic, you will need proper plastic welding machine. It’s very important to follow the instructions carefully. For your safety and welding process you are required to read our PDF Manuel.

If you go to catalog page of our website, you will see different categories as shown below.

  • Geomembrane
  • Plastic Welding
  • Roofing
  • Tarpaulin/ Banner
  • Textiles/ SEG

You can check which types of tools and machinery is best used for you needs. If you have any questions, we are available 24/7.

Sometimes it could be more challenging for you. JC tool recommends you follow our tips of Plastic Welding.

Welding Procedures of Hot Air Plastic Welding Gun Hot Air Gun (JC-1600A-HG Hot Air Plastic Welding Gun)

If you are looking for demonstration video please follow this link “  https://jc-tool.com/product/hot-air-plastic-welding-gun/   “

Operating Instructions of Hot Air Gun

Readiness of working

Fit appropriate nozzle as required

Connect tool to the power

Adjust air temperature

Switch on the use after 5 minutes

Operation procedures of Hot Air Gun

Do welding test in accordance with national laws and regulations or the material manufacturer’s welding specification

Check the consequence of welding test

◎Set welding temperature as need.

◎Knob the temperature to zero point after use, cold airing a few minutes to cool down ocompletely, then turn the power off and keep them well.

Nozzles changeable

◎Do use tools to take them off after the nozzles cooling down completely. ◎Do not touch the hot nozzle and make sure to place it on a heat resistant surface because aof the fire hazard.


Welding Methods for Polymeric Materials – Hot Air Gun

Hot Air Gun Plastic Welding Process
Hot Air Gun Plastic Welding Process

External methods – Thermal

  • Hot Air Welding
  • Hot Wedge Welding
  • Laser Welding
  • Extrusion Welding
  • Digital 3D Welding
  • Geo-membrane

Internal Methods – Mechanical

  • Spin Welding
  • Stir Welding
  • Vibration Welding
  • Ultrasonic Welding

Internal Methods of Plastic Welding Machine

  • Resistance/implant/electrocution welding
  • Induction welding
  • Dielectric welding
  • Microwave Welding

Maintenance of Hot Air Gun

  • Clean the blow-in air filter by small brush or replace the filter.
  • Clean the nozzle by steel brush provided.
  • Check the power source and plug to avoid electrical or mechanical parts damaged

Leave a Reply

Close Menu